Specifications

Dr X Kit 2003/04/05 600RR X-treme DIY

• All parts included for hassle free install (including Dremel cutting blades, plastic adhesive, wire tap connectors, heatshrink, tie wraps, rubber bands, stickers and step-by-step color manual)

• Installs into OEM Honda 600RR taillight (Honda Part No. 33701-MEE-671)

• Includes Dr X Kit 2003/04/05 600RR X-treme PCB, Dr X Kit FX Switch & i-pak

Dr X Kit 2003/04/05 600RR X-treme PNP (Hotswap, CSI or New Taillight)

• All parts included for quick installation (including wire tap connectors, tie wraps and step-by-step color manual)

• Dr X Kit 2003/04/05 600RR X-treme PCB installed into OEM 600RR taillight (Honda Part No. 33701-MEE-671) by specialized VFX technicians

• Each PNP kit is tagged with a serial number for process traceability

• Includes Dr X Kit 2003/04/05 600RR X-treme PCB, Dr X Kit FX Switch & i-pak

____________________

Sub-Component specifications:

Dr X Kit 2003/04/05 600RR X-treme PCB (VFX No. XH6R-203-PCB)

• Circuit boards manufactured to commercial IPC specifications

• Each circuit board electrically tested (Probot tested) for trace integrity

• Components machine assembled via pick & place robotics, reflow ovens and wave soldering for ultimate in reliability

• Boards coated with BLACK enamel for clean/sleek appearance

• Centralized wire bus for easy feed through of wires at base of taillight - uses same exit hole as OEM board

• Wires color matched with OEM for easy install

• Board footprint and mounting holes identical to OEM for easy install

Dr X Kit FX Switch (VFX No. XSBA-410)

• Sleek SPDT bat switch for activation

• LEDs to confirm activation of either F1 or F2 Functions

• Connectorized for easy PLUG ‘n PLAY installation with Dr. X Kit

• Custom Wire Harness with flexible high temperature black mesh sheathing

• Integrated fuse and fuse holder for short circuit protection

• All electronics completely potted for weather proof seal

• Designed for discrete panel mounting

Dr X Kit i-pak (VFX No. XPAK-411)

• Intelligent power regulation for safeguarding against ESD, alternator voltage spikes, current overload

• Maintains tight tolerance power regulation/filtering - prevents LED flicker at all engine RPM's

• Connectorized for PLUG ‘n PLAY installation with Dr. X Kit

• All electronics completely potted for weather proof seal

• Peel and stick installation

Plastic Adhesive (VFX No. VPAD-010)

• Formulated by VFX engineers specifically for re-sealing taillights

• One part adhesive - ready to use, no mixing required (DIY)

• Easy squeeze dispensing pouch - users can control opening and flow (DIY)

• Similar viscosity as honey - great for filling gaps without running (DIY)

• Impermeable to elements (i.e. water, gasoline, oil, road grime and outdoor temperatures)