FAQ

Q1 Which model does the PIVOT KIT R1 work on?
A1 The Pivot Kit R1 has been specifically designed for bolt-on installation onto the 2002/2003 R1 models. Installation on previous generations is possible if a similar 5-hole pattern is drilled.

Q2 How do I plug in the LEDs?
A2 The Pivot Kit R1 wires plug into the same connectors that the original plate light plugged into.  No splicing or tapping required.

Q3 Will my plate work with the kit?
A3 See product specifications to verify hole spacing for plate compatibility. The Pivot Kits are designed to fit both WIDE and NARROW format plates. The PIVOT KIT series has been sold worldwide and to date all plates have been compatible (i.e. all US & Canada States/provinces, Europe, Australia, Japan, South Africa, etc..)

Q4 How do I program the LED animations?
A4 PIVOT KIT R1's sold after September 2004 incorporate new electronics allowing for various LED animations through our ground breaking RIP technology. Included in these animations is an OFF state, which allows the user to turn off the LEDs while the bike remains on without undoing any of the wiring. Check out the PIVOT KIT R1 RIP CARD for more information on programming and animations.

Q5 Is it legal?
A5 With a wide range of regulations, this is left up to the customer to determine with your local authorities. In essence, this kit has been designed for maximum mounting flexibility with illumination and a professional look >> should not pose a problem.

Q6 How is the preload adjusted for On-THE-FLY control?
A6 Users may adjust the preload on the PIVOT BOLTS using the hex key provided.

Q7 Is a motorized version available?
A7 Due to liability issues, the PIVOT KIT R1 is not available with a motor/servo. However, our designers have included mounting points to enable customers to fit their own servo kits.

Q8 How bright are the LEDs? Is the kit available in other LED colors?
A8 The Pivot Kit R1 uses ultra bright BLUE or WHITE LEDs. These specific LEDs have been chosen for unbeatable intensity over a wide viewing angle for greater dispersion of light for:

• Illumination of the License Plate (LEDs are aimed in such a way as to reflect light onto the full width of plate)

• Illumination of the R1 Emblem

• Undertail & Ground effects illumination

• The PIVOT KIT R1 is not available in other LED colors.

Q9  Do I need the OEM hardware package?
A9 The OEM hardware package (VFX Part No. PKR1-202-HW) is only required if you have misplaced the hardware that mounted the original fender/plate assembly.

Q10 Why do I need this kit?
A10 Most enthusiasts place great emphasis on cleaning up the rear tail with trick LED taillight Kits (check out the trick DR X Kit R1). But when it comes to mounting the plate they simply screw on using a cheap ‘home-made’ bracket. The pivot kit provides a professional appearance with just the right aftermarket flare…the ultimate fender eliminator kit.