Installation Manual + PGM Card

The Running Light FX kit inline module installs in between the signal and the turn signal wires.  Typically there are 3 wires from the bike's harness (power, signal, ground) - these 3 connect to the input end of the module.  At the output end of the module there are 2 wires which connect directly to the 2-wire aftermarket signal/flushmount.

For models where constant power is not supplied (ie. Suzuki, Honda), another nearby ignition power source can be tapped (e. headlight, horn, relay supply, etc.)

For complete step-by-step installation instructions including wiring diagram, click on the PDF file link or image below:

Running Light FX Kit Installation Manual Rev 3.1 (PDF 68kB)

________________

Running Light FX PGM Card

Once installed, the Running Light FX kit offers users a choice of 14 different Running Light intensities plus jaw-dropping signal animations >> 16 signal animations + bike default!!  Simply use the 2 buttons on the kit to make your selection.  For full PGM details click on the PDF file link or image below: 

Running Light FX Kit PGM Card Rev 1.1 (PDF 61kB)