Installation Manual

As with the previous generation PIVOT KIT R1, installation remains bolt-on for the stock undertail and the MicroStrip LED Plate Light is fully PLUG 'n PLAY - plugs directly into the stock bullet receptacles.

For complete step-by-step installation instructions including diagrams and exploded views click on the PDF file link or images below:

PIVOT KIT R1 2007/08 Installation Manual English Rev 1.0 (PDF 312kB)

PIVOT KIT R1 2007/08 Emblem Bracket Installation Manual Rev 1.0 (PDF 95kB)

PIVOT KIT R1 – TURN SIGNAL BRACKET INSTALLATION

Turn Signal Brackets are a great way to add sleek short stalks to your PIVOT KIT R1. The brackets are modular in design and simply replace the standard brackets on the kit. Most aftermarket short stalks are fully compatible with the brackets (Max Stud Diameter 0.394” or 10 mm). Check out our selection of turn signal short stalks – fully compatible with all PIVOT KITs.

The following GIF animation demonstrates the steps behind the Turn Signal Bracket installation.  The PIVOT KIT R6 shown for illustration only, see PDF manual for full step-by-step instructions.